So, after installing and rooting your Pipo Smart S1 tablet, the next thing to do is to install CWM on your Pipo S1.
Here is the easiest way to do that:
1. Put your Pipo S1 in 'firmware update mode'.
2. Download Pipo S1 CWM by Danyrolux.rar from here or from here, extract it and run RKAndroidTool.exe. Leave all the fields intact and press 'Flash Rom' button.
3. Wait for the proccess to finish and reboot your tablet. You're done!
4. [Optional] If you want to upgrade from CWM-based Recovery v6.0.2.7 to v6.0.2.8, then download this zip file, copy it on your micro SD card, reboot into recovery and install it. See the below video for details.
5. Update. Download and install like above CWM v.6.0.3.1 from here, here or here.
Attention!
For 4.2.2 firmware version you have to:
- Double click on recovery address and change it from '0x00010000' to '0x00014000'.
- Leave all the rest fields intact and press 'Flash Rom' button.
- Wait for the proccess to finish and reboot your tablet. You're done!
4. [Optional] If you want to upgrade from CWM-based Recovery v6.0.2.7 to v6.0.2.8, then download this zip file, copy it on your micro SD card, reboot into recovery and install it. See the below video for details.
5. Update. Download and install like above CWM v.6.0.3.1 from here, here or here.
Attention!
For 4.2.2 firmware version you have to:
- Double click on recovery address and change it from '0x00010000' to '0x00014000'.
- Leave all the rest fields intact and press 'Flash Rom' button.
- Wait for the proccess to finish and reboot your tablet. You're done!
Enjoy, share is love!
Tidak ada komentar:
Posting Komentar