CyanogenMod CM10 v1.2 firmware installed on Pipo S1 tablet

1. First, download CyanogenMod CM10 v1.2 firmware from here or from here. 
2. Connect tablet in bootloader mode.
3. If you don't have driver installed you can install it from "drivers" folder.
4. Go to the folder RKDevelopTool_v1.35 and run RKAndroidTool (do not change anything!).
5. If drivers are installed correctly, in the bottom will say "Found RKAndroid Loader Rock Usb".
6. Press Erase IDB and wait after it finish press OK (it will take 10-20 seconds)
7. Then press 'Run' button. Tablet will restart when everything finish. (first run may take up to 5 minutes).
8. Copy the FixS1.zip file on your Pipo S1 tablet and install it via Recovery Menu.

CyanogenMod CM10 v1.2 firmware features
- System ext4
- CWM 6.0.1.5 recovery
- externe SD mounted as NAND (up to 64 GB)
- Internal storager 2,5 GB
- Init.d support
- USB-Hub enable
- Gamepad (PS2, XBox, ...)
- Kernelmodule (cifs, tun, lan, serial)
- Device = Nexus 7
- latest hosts, su, su-binary, busybox
- MX Video-Player, Play Music & Volume+
- Google Chrome, Skype, 4.2 keyboard & clock
- Reboot Menue, Kernel Tuner, Pimp my Rom
- Dateimanager HD (Root)
- Nova Launcher

Enjoy this fine release!

Always keep in mind that this is not a review, just a first look at this firmware. You have to test it more for another details, to see if it satisfies your needs.